|
|
|
HBT Series
These basic sealless canned centrifugal pumps are designed to
prevent any leakage or contamination during chemical or sanitary
processes.
Applications include: solvents pumping, oil refineries, reactors,
plating systems, and medical plants. |
HCM Series
These high temperature cooling pumps are designed not only for
the transfer of medium heating oil and high temperature petroleum
but also for the synthesis process. It greatly reduces heat loss
and prevents motor failure by thermally separating the main liquid
from the flushing liquid.
Applications include: heat transfer oils, petrochemical synthesis
process, and polymerization process. |
 |
|
HHJ Series
These pumps are designed to prevent the danger of solidification
which is normally found during the transfer of high melting point
liquids.
This model helps retain the necessary fluid temperature to maintain
pumping action by incorporating a high temperature heating jacket
through which steam or hot water is circulated.
Applications include: caprolactam, carboxylic acid, fatty
oils, caustic soda |
HRC Series
Reverse circulation pumps are designed to minimize the cavitation
effects which occur during the transfer of saturated vapor pressure
liquids, such as liquefied gasses. Minimization of the cavitation
effect is accomplished by the pressurization of the inner structure.
Applications include: ammonia, freon, LPG, and LNG. |
|
|
HHP Series
High temperature heat-proof pumps are designed to save energy
by using a thermally resistant, inorganic substance as a motor
winding insulator.
No cooling water is system required for transferring high temperature
liquids.
Applications include: heat transfer oils, petrochemical synthesis
process, polymerization process. |
HSP Series
These self-priming pumps are designed for the transfer of liquids
which are below the level of the pump. The casing has a specially
structured chamber to separate the air from the fluid that is
drawn from the suction pipe.
Applications include: solvent, toluene, benzene, and EG+waste
water. |
|
|
HSS • HSJ Series
Vertical slurry pumps are designed to prevent bearing damage
due to slurries in the liquid. A mechanical seal installed between
the pump and the motor provides physical separation between the
slurry and the motor bearings.
The HSJ Series pumps are good for the transfer of high melting
point liquids, due to the double heating jackets installed between
the casing and the adapter.
Applications include: CEG, TEG+slurry, H2O+TiO2, Lactam+TiO2,
and TiO2+EG. |
HAS • HAR Series
Low NPSH characteristics are required for absorption chiller/heater
pumps since the refrigerator operates under a high vacuum state
while circulating both absorption solution (HAS Series) and absorption
refrigeration medium (HAR Series).
Applications include: LiBr, H2O |
|
|
|
