Arrow

*The RoHS Directive

Restriction of Hazardous Substances (RoHS) is a directive of the European Union (EU), which took effect July 1, 2006. Aimed at protecting health and environment, this directive mandates that electronics products sold in the EU must be essentially void of six hazardous substances: lead, mercury, cadmium, hexavalent chromium, and PBB and PBDE flame retardants. Since lead is present in virtually every solder joint and lead finish, these new regulations directly impact the entire supply chain of the electronics industry. Your company MUST conform to the RoHS standards if you export electrical and/or electronic equipment to the EU countries.

How Restricted Substances Are Used
Restricted Chemical Industrial Use
Lead (Pb) Solder joints and lead finishes
Cadmium (Cd) Cable sheathing, switches, springs
Hexavalent chromium(Cr6+) Metal coatings for corrosion protection and wear resistance
Mercury (Hg) Thermostats, Energy-saving lamps
Polybrominated Biphenyls (PBBs) & Polybrominated Diphenyl Ethers (PBDEs) Flame retardants added to printed circuit boards
What Products Are Affected

The directive applies to household appliances, IT and telecommunications equipment, lighting equipment, electrical and electronic tools, toys, sports equipment, monitoring and control instruments.There are currently exemptions for medical equipment, military equipment, batteries, and spare parts. However, the future status of these exemptions is unclear. The exemptions may be withdrawn as safer materials are developed to replace the restricted substances in these products.

Your Responsibility

Under the RoHS Directive, producers of electrical and electronic products are responsible for self-declaring that products comply with the RoHS directives or obtaining material declarations or certificates from their suppliers. Although there are no standardized forms, these declarations need to state that materials, parts, and/or components may be used to produce RoHS compliant equipment. The authorities within the EU are conducting routine checks on products. If a product does not comply with the RoHS legislation, and producers cannot prove that they have taken reasonable steps to comply, authorities may ban the product from the EU and/or issue a penalty, including fines and/or imprisonment.

RoHS Outside the EU

Even if your company does not sell its products in the EU, your business will likely be affected by other similar developing legislation in California, Maine, New York and other US states, as well as China, Canada, Japan, Australia and other countries.

*This information is referenced from the Official RoHS Web Site. Please refer to RoHS for the most current and accurate information.

RoHS Compliant Pumps, Components, & Parts

P31 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

STAINLESS STEEL

RoHS Compliant y/n

RoHS Compliant Substitute Materials

Motor Bracket

Stainless Steel
AISI 316

Yes

 

Cover

Stainless Steel
AISI 316

Yes

 

Impeller

20% Nickel Silver
ASTM B584

No

W88(ASTM A494) or C83450 (OSHAlloy)

"O" Rings

Viton A

Yes

 

Seals

Carbon

Yes

 

Seats

Ceramic

Yes

 

Shaft

Stainless Steel
AISI 304

Yes

 

T31 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

ALL BRONZE

RoHS Compliant y/n

STAINLESS STEEL

RoHS Compliant y/n

RoHS Compliant Substitute Materials

Motor Bracket

Bronze
ASTM B62

No

 

Yes

C83450 (OSHAlloy)

Cover

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy)

Impeller

Bronze
ASTM B62

No

W88
ASTM A494

Yes

C83450 (OSHAlloy)

"O" Rings

Buna N

Yes

Viton A

Yes

 

Seals

Buna/Carbon

Yes

Viton/Carbon

Yes

 

Seats

Buna/Ceramic

Yes

Viton/Ceramic

Yes

 

Shaft

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

 

E41 • T41 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

BRONZE FITTED

RoHS Compliant y/n

ALL IRON

RoHS Compliant y/n

ALL BRONZE

RoHS Compliant y/n

STAINLESS STEEL

RoHS Compliant y/n

RoHS Compliant Substitute Materials

Motor Bracket

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy)

Cover

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy))

Impeller

Bronze
ASTM B62

No

Carbon Steel
12L14

No

Bronze
ASTM B62

No

W88
ASTM A494

Yes

C83450 (OSHAlloy))

Sleeve/Bushing

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

 

"O" Rings

Buna N

Yes

Buna N

Yes

Buna N

Yes

Viton A

Yes

 

Seals

Buna/Ceramic

Yes

Buna/Ni-Resist

Yes

Buna/Ceramic

Yes

Viton/Ceramic

Yes

 

Seats

Buna/Carbon

Yes

Buna/Carbon

Yes

Buna/Carbon

Yes

Viton/Carbon

Yes

 

Shaft

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

 

E51 • T51 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

BRONZE FITTED

RoHS Compliant y/n

ALL IRON

RoHS Compliant y/n

ALL BRONZE

RoHS Compliant y/n

STAINLESS STEEL

RoHS Compliant y/n

RoHS Compliant Substitute Materials

Motor Bracket

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy))

Cover

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy))

Impeller

Bronze
ASTM B62

No

Carbon Steel
12L14

No

Bronze
ASTM B62

No

W88
ASTM A494

Yes

C83450 (OSHAlloy))

Sleeve/Bushing

Bronze
ASTM B62

No

Stainless Steel

Yes

Bronze
ASTM B62

No

Stainless Steel

Yes

 

ASTM B62

AISI 316

ASTM B62

AISI 316

"O" Rings

Buna N

Yes

Buna N

Yes

Buna N

Yes

Viton A

Yes

 

Seals

Buna/Ceramic

Yes

Buna/Ni-Resist

Yes

Buna/Ceramic

Yes

Viton/Ceramic

Yes

 

Seats

Buna/Carbon

Yes

Buna/Carbon

Yes

Buna/Carbon

Yes

Viton/Carbon

Yes

 

Shaft

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

Stainless Steel
AISI 304

Yes

 

M50 • L50 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

BRONZE FITTED

RoHS Compliant y/n

ALL IRON

RoHS Compliant y/n

ALL BRONZE

RoHS Compliant y/n

STAINLESS STEEL

RoHS Compliant y/n

RoHS Compliant Substitute Materials

Inlet Cover

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy))

Outlet Cover

Cast Iron
ASTM A48

Yes

Cast Iron
ASTM A48

Yes

Bronze
ASTM B62

No

Stainless Steel
AISI 316

Yes

C83450 (OSHAlloy))

Impeller

Bronze
ASTM B62

No

Carbon Steel
12L14

No

Bronze
ASTM B62

No

W88
ASTM A494

Yes

C83450 (OSHAlloy))

Shaft

Stainless Steel
AISI 416

Yes

Stainless Steel
AISI 416

Yes

Stainless Steel
AISI 316

Yes

Stainless Steel
AISI 316

Yes

 

"O" Rings

Buna N

Yes

Buna N

Yes

Buna N

Yes

Viton A

Yes

 

Seals

Buna/Ceramic

Yes

Buna/Ni-Resist

Yes

Buna/Ceramic

Yes

Viton/Ceramic

Yes

 

C41 • C51 • C61 Series Pumps « Click here for ON/OFF RoHS Compliant list

PART

STAINLESS STEEL

RoHS Compliant y/n

Motor Bracket

Stainless Steel
AISI 316

Yes

Cover

Stainless Steel
AISI 316

Yes

Impeller

Stainless Steel
AISI 316

Yes

"O" Rings

Stainless Steel
AISI 316

Yes

Seats

Viton A

Yes

Shaft

Viton/Carbon

Yes

Viton/Ceramic

Yes

Motors « Click here for ON/OFF RoHS Compliant list

Weg

RoHS Compliant

Bluffton

RoHS Compliant

DLT Electric

RoHS Compliant

Marathon

RoHS Compliant

US (Emerson)

RoHS Compliant